Credit Card Processing






(Your shopping cart is empty)

  Home > AR-15 PARTS 5.56/223 >

KNS AR15 Gen ST Non Rotating Trigger/Hammer Pins .154; Black
KNS AR15 Gen ST Non Rotating Trigger/Hammer Pins .154; Black


 
List Price: $38.00
Our Price: $36.99
Sale Price: $34.99
You save $3.01!

Stock Status:In Stock
Availability:: Usually Ships in 24 Hours
Product Code: KNS-NRTHPGEN-ST-BLK
Qty:

Description
 

These are the Generation ST pin sets that were designed for the Spike's Tactical Compressor Rifle Series. These are the STRONGEST pins that can be produced and were designed to withstand the high impact of full and semi-auto 9mm, .223, and 7.62mm suppressed weapons. The pins are stainless steel. The Custom designed end retainers are black oxide. An absolute must-have for all M-16 owners. They will also protect your AR-15. Special anti-creep retainers prevent wear on your irreplaceable M-16 or AR-15 receiver. Pin installation tool & 2 Torx wrenches included. No modification to firearm required. THE TORQUE SPEC ON THE SCREW IS 11 inch/lbs. MAXIMUM.

This pin set is ONLY available in .154 diameter

IMPORTANT NOTE: The external width of some AR receivers may vary in the trigger/hammer pin area depending on the manufacturer. Our pins may be shortened a small amount by carefully filing material evenly from both ends of the pins. The being too long will not affect the function or performance.

These are the Generation ST pin sets that were designed for the Spike's Tactical Compressor Rifle Series. These are the STRONGEST pins that can be produced and were designed to withstand the high impact of full and semi-auto 9mm, .223, and 7.62mm suppressed weapons. The pins are stainless steel. The Custom designed end retainers are black oxide. An absolute must-have for all M-16 owners. They will also protect your AR-15. Special anti-creep retainers prevent wear on your irreplaceable M-16 or AR-15 receiver. Pin installation tool & 2 Torx wrenches included. No modification to firearm required. THE TORQUE SPEC ON THE SCREW IS 11 inch/lbs. MAXIMUM. This pin set is only available in .154 diameter and Black. IMPORTANT NOTE: The external width of some AR receivers may vary in the trigger/hammer pin area depending on the manufacturer. Our pins may be shortened a small amount by carefully filing material evenly from both ends of the pins. The being too long will not affect the function or performance.

Features
  • THIS PRODUCT IS SIZE 0.154
  • MOST receivers will use the .154 size


Browse for more products in the same category as this item:

AR-15 PARTS 5.56/223
MUST HAVE GEAR
AR-15 Lower Receiver Parts
Desert Tactical

 About Us
 Become an Affiliate
 Privacy Policy
 Send Us Feedback
 
Company Info | Advertising | Product Index | Category Index | Help | Terms of Use
Copyright © Desert Tactical. All Rights Reserved.
Built with Volusion